Calculation methodology
Every calculator on this site follows the same four steps. Knowing them makes it easy to check any result by hand.
1. Convert everything to one unit
Each measurement is converted to metric base units (metres, square metres, cubic metres, kilograms, watts) before any arithmetic, and converted back only for display. Conversion factors are exact definitions, kept in one file:
1 in = 25.4 mm 1 ft = 12 in = 0.3048 m 1 yd = 3 ft 1 cu yd = 27 cu ft 1 US gal = 231 cu in = 3.785411784 L 1 lb = 0.45359237 kg 1 BTU = 1,055.06 J
That is why you can type feet for one dimension, inches for another and metres for a third — and why 12' 6" is understood as 12.5 feet.
2. Calculate the exact quantity
Formulas are standard geometry: areas are length × width, volumes add depth, and product rules (coverage per gallon, yield per bag, bundles per square) come from manufacturers' published figures. Each calculator page shows its formula and a worked example you can follow with a pocket calculator.
3. Add waste deliberately
Waste is never hidden. It is a separate, labelled input with a default chosen for that material — 10% for paint and straight flooring, 15% for diagonal tile or hip roofs, 5–10% for concrete — and the result shows the quantity both before and after it is applied.
4. Round only once, and only up to real packages
Intermediate numbers are never rounded. The final quantity is rounded up to whole packages — cans, bags, boxes, bundles, sheets — because stores sell whole units. When several rooms or pieces are combined, they are added first and rounded once, so you don't pay for a partial box per room.
Displayed numbers are rounded for readability: whole square feet for room areas, two decimals for cubic yards, money to the cent under $1,000. A result like 2.478 gallons is shown as 2.48 gal calculated and 3 gal to buy.
Prices
Prices are always entered by you. Example prices in forms are placeholders, not market data. We don't publish local cost estimates until we have sourced, dated regional price data — see cost estimators.
Where estimates stop
- Calculators plan materials; they don't replace engineers, contractors, electricians, or local building codes.
- Structural sizes (footings, framing, stairs), HVAC capacity, electrical loads, generators and solar systems carry specific cautions on their pages.
- Complex shapes — dormered roofs, curved walls, irregular lots — should be measured by a professional.
Testing
Every formula and unit conversion is covered by automated tests with hand-computed expected values (for example, a 10 × 10 ft slab 4 in thick must equal 33.33 cu ft and 1.235 cu yd). Results are checked in both US customary and metric units.
Found a result that looks wrong? Tell us what you entered and what you expected — it's the most useful feedback we get.