Skip to content
MeasureToBuy

Project planner

Build a deck

Size a rectangular deck and get the whole material list: deck boards and fasteners, joists, rims, posts and footing concrete — priced with your lumber yard's numbers.

  1. 01 Deck size
  2. 02 Decking
  3. 03 Framing
  4. 04 Footings
  5. 05 Cost
  6. 06 Summary
  1. Step 1: Deck size

    Length along the house and width out from it.

    Deck boards run this way, parallel to the house.

    Joists run this way.

    Deck area16 ft × 12 ft
    192 sq ft
  2. Step 2: Decking

    Board width, gap and the stock length you'll buy.

    5½ in for 5/4×6 and 2×6 boards, 3½ in for ×4 boards. Composite is usually 5½ in.

    3/16 in (5 mm) is common; follow the manufacturer for composite.

    Board length you'll buy

    Butt joints must land on a joist; stagger them between rows.

    Waste allowance

    End trims, split boards and stagger offcuts.

    Fasteners

    2 per board at every joist

    A 5 lb box of 2½ in deck screws holds about 350–400.

    Rows of boards
    26 rows
    Deck boards16 ft long, incl. waste
    29 boards
    Deck screws676 screws
    2 boxes
  3. Step 3: Framing

    Joists under the boards, a beam on posts at the outer edge.

    Joist spacing

    Wood and most composite, straight boards

    6–8 ft is typical. Your beam size and local code set the maximum.

    Joists12 ft stock, 16 in o.c.
    13 joists
    Ledger + rim joistalong the house and the outer edge
    32 ft
    Beamsouter edge only
    1 beam
    Posts4 per beam
    4 posts
  4. Step 4: Footings

    One concrete footing under each post.

    Below your local frost line.

    Bag size

    0.60 cu ft per bag

    Footings
    4 footings
    Concrete2.4 cu ft each
    0.35 cu yd
    Premix bags (incl. 10%)
    18 bags
  5. Step 5: Cost

    Prices from your lumber yard.

    per board
    per joist
    per post
    per bag
    per box
    Joist hangers & hardware
    Deck boards
    $812.00
    Fasteners
    $90.00
    Joists and rims
    $512.00
    Posts
    $100.00
    Footing concrete
    $117.00
    Hangers and hardware
    $150.00
    Estimated material cost
    $1,781

MeasureToBuy · project summary

Deck material estimate

Buy 29 deck boards plus 13 joists and 4 posts.

Measurements

  • Deck length (along the house): 16 ft
  • Deck width (out from the house): 12 ft
  • Board face width: 5.5 in
  • Gap between boards: 0.188 in
  • Board length you'll buy: 16 ft
  • Joist spacing: 16 in o.c.
  • Fasteners: Deck screws
  • Screws per box: 350
  • Attached to the house with a ledger: Yes
  • Post spacing along each beam: 6 ft
  • Footing diameter: 12 in
  • Footing depth: 3 ft
  • Bag size: 80 lb
  • Joist hangers & hardware: Include an allowance

Key figures

Deck area16 ft × 12 ft
192 sq ft

Shopping list

Deck boards16 ft long, incl. waste
29 boards
Deck screws676 screws
2 boxes
Joists12 ft stock, 16 in o.c.
13 joists
Ledger + rim joistalong the house and the outer edge
32 ft
Posts4 per beam
4 posts
Premix bags (incl. 10%)
18 bags

Material cost

Deck boards
$812.00
Fasteners
$90.00
Joists and rims
$512.00
Posts
$100.00
Footing concrete
$117.00
Hangers and hardware
$150.00
Estimated material cost
$1,781

Beam, joist and post sizes, ledger attachment, footing depth and railings are set by local code — confirm them with your building department before buying. Railings, stairs, flashing and ledger fasteners are not included. Use the Stair Calculator for steps.

Calculators provide planning estimates. Actual material requirements vary with product specifications, installation method, site conditions, local codes and project complexity.

Before you start

  • Check local code first: footing depth, beam and joist sizes, ledger attachment and railing height are all regulated.
  • Decide the board direction — this planner runs boards parallel to the house, on joists running out from it.
  • Call 811 (or your local utility locator) before digging footings.

Questions about this project

How far apart should deck joists be?

16 in on center is standard for wood and most composite boards laid straight. Diagonal decking and some composites need 12 in — check the board manufacturer.

How many footings does a deck need?

One under each post. Posts are typically 6–8 ft apart along each beam; an attached deck has one beam at the outer edge, a freestanding deck has two.

Calculators used in this project

Need just one number? Each step is also a stand-alone calculator.