Material guide
Lumber
Lumber is named by nominal size, sold by the piece in stock lengths, and priced per board foot for hardwoods. Most counting mistakes come from using nominal widths.
Calculators
- Lumber CalculatorStuds and plates for a framed wall.
- Board Foot CalculatorBoard feet and price for a lumber list.
- Decking CalculatorDeck boards, joists and screws.
- Fence CalculatorPosts, rails, pickets or panels, and post concrete.
- Stair CalculatorRisers, treads, run and stringer length.
- Plywood Calculator4×8 sheets for floors, walls and roofs.
- Baseboard CalculatorBaseboard lengths and corners per room.
- Crown Molding CalculatorCrown molding lengths and corners.
How lumber is sold
- Piece
- Stock lengths of 8, 10, 12, 14 and 16 ft.
- Board foot
- 144 cubic inches (12 × 12 × 1 in). How hardwood is priced.
- Linear foot
- Common for trim, decking and fencing.
- Sheet
- Plywood and OSB in 4 × 8 ft sheets.
Terms on the label
- Nominal size
- The name of a board (2×4) — the actual size is smaller (1½ × 3½ in).
- On center (o.c.)
- Spacing measured from the center of one member to the next — 16 in o.c. is standard for studs and joists.
- Pressure-treated
- Lumber treated to resist rot and insects; required for ground contact and most deck framing.
Buying tips
- Choose lengths that minimise joints and offcuts — a 12 ft deck uses 12 ft boards, not 8 + 4.
- Buy 10% extra for culls and cutting mistakes.