Project planner
Tile a bathroom
From the floor and tub or shower walls to boxes of tile, bags of thinset by trowel notch, grout and the total material cost. Every number matches the stand-alone tile, thinset and grout calculators.
- 01 Floor tile
- 02 Wall tile
- 03 Thinset and grout
- 04 Cost
- 05 Summary
Step 1: Floor tile
The floor outside the tub or shower, your tile size and layout.
The tiled floor outside the tub or shower.
⅛ in (3 mm) is common; 1/16 in for rectified tile.
On the box label. Leave as is if buying loose tiles.
- Floor area
- 27.5 sq ft
- Tub surround area
- 60 sq ft
- Area to tile
- 27.5 sq ft
- Tile size
- 12 in × 12 in
- Tiles to cover the area0.98 tiles per sq ft with joints
- 27 tiles
- Waste allowance
- 10%
- Tiles to buy
- 30 tiles
- Boxes of 1030 sq ft of tile
- 3 boxes
- Grout, approximately1 × 25 lb bag
- 1.8 lb
Step 2: Wall tile
A tub surround or walk-in shower, and the wall tile.
The back wall: a standard tub is 5 ft (1.5 m).
Each end wall is this wide.
From the tub rim to the top of the tile.
1/16 in (1.5 mm) is typical for subway tile.
On the box label.
- Area to tile
- 60 sq ft
- Tile size
- 3 in × 6 in
- Tiles to cover the area7.76 tiles per sq ft with joints
- 466 tiles
- Waste allowance
- 10%
- Tiles to buy
- 512 tiles
- Boxes of 10075 sq ft of tile
- 6 boxes
- Grout, approximately1 × 25 lb bag
- 5.7 lb
Step 3: Thinset and grout
Trowel notches set how much mortar you need; tile thickness sets grout depth.
Used for the grout estimate.
Larger tiles need larger notches for full contact.
- Thinset, 50 lb bagsfloor ¼ × ⅜ in square, walls ¼ × ¼ in square
- 2 bags
- Groutincl. 10% extra
- 8.2 lb
- Grout, 25 lb bags
- 1 bag
Step 4: Cost
Your store's prices for tile and setting materials.
per sq ftper sq ftper 50 lb bagper bag- Floor tile
- $120.00
- Wall tile
- $225.00
- Thinset
- $50.00
- Grout
- $22.00
- Estimated material cost
- $417.00
MeasureToBuy · project summary
Bathroom tile project
Buy 9 boxes of tile, 2 bags of thinset and 1 of grout.
Measurements
- Floor length: 5.5 ft
- Floor width: 5 ft
- Floor tile width: 12 in
- Floor tile length: 12 in
- Floor grout joint: 0.125 in
- Floor tiles per box: 10
- Wet area walls: Tub surround
- Tub length: 5 ft
- Tub depth: 30 in
- Tile height above tub: 6 ft
- Wall tile width: 3 in
- Wall tile length: 6 in
- Wall grout joint: 0.063 in
- Wall tiles per box: 100
- Tile thickness: 0.375 in
- Floor trowel notch: ¼ × ⅜ in square
- Wall trowel notch: ¼ × ¼ in square
Key figures
- Floor area
- 27.5 sq ft
- Tub surround area
- 60 sq ft
Shopping list
- Boxes of 1030 sq ft of tile
- 3 boxes
- Boxes of 10075 sq ft of tile
- 6 boxes
- Thinset, 50 lb bagsfloor ¼ × ⅜ in square, walls ¼ × ¼ in square
- 2 bags
- Grout, 25 lb bags
- 1 bag
Material cost
- Floor tile
- $120.00
- Wall tile
- $225.00
- Thinset
- $50.00
- Grout
- $22.00
- Estimated material cost
- $417.00
Walls behind a tub need cement board or a waterproofing membrane, not plain drywall. Joints under ⅛ in take unsanded grout; ⅛ in and wider take sanded grout. Floor and walls may need different bags.
Calculators provide planning estimates. Actual material requirements vary with product specifications, installation method, site conditions, local codes and project complexity.
Before you start
- Measure the floor outside the tub or shower and the height you'll tile on the walls.
- Check tile size, tiles per box and thickness on the box label.
- Wet areas need a waterproof backer or membrane behind the tile — plan it with your tile system.
Questions about this project
What trowel should I use for bathroom tile?
Whatever gives at least 95% mortar contact in wet areas (80% on dry floors). Small wall tile often uses a ¼ × ¼ in notch; larger floor tile a ¼ × ⅜ in or ½ in notch. Lift a tile to check.
Should floor and wall tile use the same grout?
They can, as long as the grout suits both joint widths: non-sanded up to ⅛ in, sanded for wider joints.
Calculators used in this project
Need just one number? Each step is also a stand-alone calculator.