Lumber, decking and carpentry calculators
Lumber is sold by the piece in nominal sizes, priced by the board foot for hardwoods, and installed at specific spacings. Each project has its own counting rule: boards across a deck, posts along a fence, sheets across a wall.
These calculators use actual (not nominal) dimensions where it matters and round to the stock lengths and sheet sizes you can buy.
Start here
Decking Calculator
Deck boards, joists and screws.
All lumber & carpentry calculators
- Lumber CalculatorStuds and plates for a framed wall.
- Board Foot CalculatorBoard feet and price for a lumber list.
- Plywood Calculator4×8 sheets for floors, walls and roofs.
- Drywall CalculatorSheets, mud, tape and screws for a room.
- Fence CalculatorPosts, rails, pickets or panels, and post concrete.
- Stair CalculatorRisers, treads, run and stringer length.
- Baseboard CalculatorBaseboard lengths and corners per room.
- Crown Molding CalculatorCrown molding lengths and corners.
Projects that use these
Common questions
Why is a 2×4 not 2 inches by 4 inches?
Nominal sizes describe the rough-sawn board before drying and planing. A 2×4 is actually 1½ × 3½ inches. Calculators that count boards across a width use the actual dimension.
What is a board foot?
A volume of wood 12 inches × 12 inches × 1 inch thick — 144 cubic inches. Hardwood is usually priced per board foot.