Roofing, siding and gutter calculators
Roofing is measured in squares — 100 square feet of roof surface — and shingles are sold in bundles, usually three to a square. The roof surface is always larger than the footprint, because pitch adds slope length.
Siding uses the same squares, measured on the walls and gables, and gutters are sized from the roof area that drains to them. These calculators cover the whole shell, from ridge to downspout.
Start here
Roofing Calculator
Roof area, squares, bundles and accessories.
All roofing, siding & gutters calculators
- Roof Area CalculatorSloped roof area from footprint and pitch.
- Attic Ventilation CalculatorNet free vent area, ridge and soffit vents.
- Roof Pitch CalculatorPitch from rise, angle or percent slope.
- Shingle CalculatorBundles, starter and ridge cap from roof area.
- Roofing Cost CalculatorShingle roof materials, priced line by line.
- Siding CalculatorSiding squares, cartons and planks.
- Gutter CalculatorGutter size, downspouts and hangers.
Projects that use these
Common questions
What is a roofing square?
A square is 100 square feet of roof surface. A 2,000 sq ft roof is 20 squares. Most architectural shingles come three bundles to the square.
Can I measure a roof from the ground?
For a simple gable or hip roof, yes: measure the footprint including overhangs and apply the pitch multiplier. Complex roofs with dormers, multiple valleys or varying pitches should be measured by a roofer or from satellite measurements.