Project planner
Build a paver patio
Measure the patio once and this planner carries it through excavation depth, compacted base, bedding sand, pavers, joint sand and edging, ending in a shopping list and a material cost.
- 01 Patio area
- 02 Excavation and base
- 03 Pavers
- 04 Sand and edging
- 05 Cost
- 06 Summary
Step 1: Patio area
Measure the paved area and say what it's for — driveways need a deeper base.
- Patio area
- 144 sq ft
Step 2: Excavation and base
ICPI minimums: 4–6 in of compacted base under patios and walks, 6–8 in under driveways.
ICPI minimums: 4–6 in for walks and patios, 6–8 in for driveways. Deeper on clay or in frost areas.
2⅜ in (60 mm) for patios and home driveways; 3⅛ in (80 mm) for regular vehicle traffic.
- Excavation depthbase + bedding + paver
- 7.4 in
- Soil to remove
- 3.28 cu yd
- Compacted base
- 4 in
- Base gravel (crusher run)2.04 cu yd incl. 15% compaction
- 3.17 tons
Step 3: Pavers
Paver size and a waste allowance for your laying pattern.
- Pavers per sq ft
- 4.5
- Pavers before waste
- 648
- Waste allowance
- 10%
- Pavers to buy
- 713 pavers
Step 4: Sand and edging
1 in of bedding sand, polymeric sand for the joints and edge restraint on the open sides.
Screeded to 1 in (25 mm).
sq ft per 50 lb bagFrom your bag: Alliance Gator lists 65–85 sq ft for ⅛–⅜ in joints and 22–42 sq ft for ¾–1¼ in joints.
Sides that butt a house or slab don't need edge restraint.
- Bedding sand0.44 cu yd at 1 in
- 0.6 tons
- Or 50 lb sand bags
- 24 bags
- Polymeric joint sand
- 3 bags
- Edge restraintExposed sides only
- 48 ft
Step 5: Cost
Enter your supplier's prices. Nothing is guessed.
per paverper tonsper 50 lb / 25 kg bagper bagper ft- Pavers
- $534.75
- Base gravel
- $142.60
- Bedding sand
- $120.00
- Polymeric sand
- $105.00
- Edge restraint
- $72.00
- Total materials
- $974.35
MeasureToBuy · project summary
Paver patio project
You need 713 pavers for 144 sq ft, including 10% for cuts.
Measurements
- Patio shape: Rectangles
- Patio: length 12 ft, width 12 ft
- What is it for?: Patio or walkway
- Paver size: 4 × 8 in
- Compacted base depth: 4 in
- Bedding sand: 1 in
- Paver thickness: 2.375 in
- Polymeric sand coverage: 65
- Edge against a wall or existing paving: 0 ft
Key figures
- Patio area
- 144 sq ft
- Excavation depthbase + bedding + paver
- 7.4 in
- Soil to remove
- 3.28 cu yd
- Compacted base
- 4 in
- Base gravel (crusher run)2.04 cu yd incl. 15% compaction
- 3.17 tons
Shopping list
- Base gravel (crusher run)2.04 cu yd incl. 15% compaction
- 3.17 tons
- Pavers to buy
- 713 pavers
- Or 50 lb sand bags
- 24 bags
- Polymeric joint sand
- 3 bags
- Edge restraintExposed sides only
- 48 ft
Material cost
- Pavers
- $534.75
- Base gravel
- $142.60
- Bedding sand
- $120.00
- Polymeric sand
- $105.00
- Edge restraint
- $72.00
- Total materials
- $974.35
Compact the base in layers no thicker than your plate compactor can handle (ICPI: typically 4–6 in lifts). Buy a few spare pavers from the same batch for future repairs — colour varies between runs.
Calculators provide planning estimates. Actual material requirements vary with product specifications, installation method, site conditions, local codes and project complexity.
Before you start
- Call 811 (or your local utility locator) before you dig.
- Plan a slight slope away from the house so water drains off the patio.
- Rent a plate compactor — the base has to be compacted in layers to last.
Questions about this project
How deep do I dig for a paver patio?
Base depth plus 1 in of sand plus the paver thickness. With ICPI's 4 in minimum base and 2⅜ in pavers, that's about 7⅜ in below the finished surface.
Can I lay pavers on sand alone?
No — the compacted crushed-stone base carries the load and drains water. Sand alone washes out and settles.
Calculators used in this project
Need just one number? Each step is also a stand-alone calculator.