Skip to content
MeasureToBuy

Aquarium Volume Calculator

Find how many gallons your fish tank holds at its real water level, what that water weighs, and roughly what the whole set-up weighs — so you can check the stand and the floor.

Measurements

Tank shape

Tanks are rarely filled to the brim — about 1 in (2–3 cm) is typical.

Your estimate

Your tank holds about 54 gallons of water.

20 in of water depth in a 56.7 gal tank, weighing roughly 681 lb set up.

Water volumeto the water line
54 gal
Liters
204.5 L
Tank capacity (to the brim)
56.7 gal
Water weight8.34 lb per gallon
451 lb
Estimated filled weightrule of thumb 567 lb–681 lb with glass, substrate and decor
681 lb
  • Plan the stand for about 681 lb. Use a stand rated for the tank and keep it level — an uneven stand stresses the glass seams.
  • Outside dimensions include the glass, so real water volume is a little lower — measure inside the glass for dosing medication.
Front and side elevation
48 in21 inFRONT13 inSIDEWATER LINE
Volume = 48 in × 13 in × 21 in · water to 1 in below the top

Next step

Filling something bigger?

The pool calculator handles shallow and deep ends, fill time and water cost.

Calculate pool volume

Also useful

Other shapes and conversions

Convert any box or cylinder between cubic feet, gallons, liters and cubic meters.

Open the cubic feet calculator

How to measure

  1. Measure length, width (front to back) and height in inches. Inside the glass is most accurate; outside dimensions slightly overstate the volume.
  2. For a cylinder tank, measure the diameter and height.
  3. Set how far below the rim you keep the water — usually about 1 in.

How the aquarium volume calculation works

Water height = tank height − gap below rim
Rectangular  = length × width × water height
Cylinder     = π × (diameter ÷ 2)² × water height

Gallons      = cubic inches ÷ 231
Water weight = gallons × 8.34 lb
Set-up weight ≈ tank gallons × 10–12 lb

A US gallon is defined as 231 cubic inches, so tank dimensions in inches convert directly. In metric, 1,000 cm³ is a liter and weighs 1 kg.

Fresh water weighs 8.34 lb per gallon. Glass, substrate, rock and decor bring a set-up tank to roughly 10–12 lb per gallon of tank size — a rule of thumb, not a scale reading.

Worked example

A standard 55 gallon tank, 48 × 13 × 21 in, filled to 1 in below the rim.

  1. Water height: 21 − 1 = 20 in
  2. Water: 48 × 13 × 20 = 12,480 cu in ÷ 231 = 54 gal
  3. Water weight: 54 × 8.34 = 451 lb
  4. Tank size: 48 × 13 × 21 ÷ 231 = 56.7 gal
  5. Set-up weight: 56.7 × 10–12 = 567–681 lb

About 54 gallons of water, and close to 700 lb when fully set up — a stand and floor rated for that, not a bookcase.

Reading your result

Use the water volume for medication, dechlorinator and stocking guidance — not the nominal tank size.

Plan the stand for the high end of the filled-weight range, and keep it perfectly level so the seams aren't stressed.

Tanks over about 1,000 lb filled — roughly 90 gallons and up — are worth placing against a load-bearing wall, across the floor joists.

Assumptions

  • Water weight is for fresh water. Salt water is about 3% heavier.
  • The 10–12 lb per gallon set-up figure assumes ordinary glass, a 2–3 in substrate bed and moderate rockwork. Heavy rockscapes push it higher.
  • Bow-front, hexagonal and corner tanks aren't modelled — use the manufacturer's stated volume.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Large tanks on upper floors, or anything over a few hundred gallons, should be checked by a builder or structural engineer.

Frequently asked questions

How much does a 55 gallon fish tank weigh?

About 450 lb of water, and roughly 570–680 lb set up with glass, substrate and decor.

How do I calculate aquarium gallons?

Multiply length × width × water height in inches and divide by 231. In centimeters, divide by 1,000 for liters.

Why is my tank's real volume less than its label?

Labels are nominal: outside dimensions, filled to the brim. Glass thickness, the gap below the rim and substrate all take up space, so real water volume is often 10–20% lower.

Can my floor hold a big aquarium?

Most modern floors carry a 55–75 gallon tank without trouble. For larger tanks, position the stand across the joists and near a load-bearing wall, and get advice for anything very large or on an upper floor.

More area & volume calculators

All area & volume