How to measure
- Measure each wall's width along the floor, corner to corner.
- Measure height from floor to ceiling. For a gable wall, measure the rectangular part up to where the slope starts, then the gable from there to the peak.
- Count doors and windows. The default sizes are a 3 × 7 ft door (21 sq ft) and a 3 × 5 ft window (15 sq ft); change them under Advanced options.
- Measuring a whole room? Add four walls, or use length + width as one wall's width and double it.
How the wall area calculation works
Wall area = width × height (each wall) Gable area = base width × gable height ÷ 2 Total area = Σ walls + gables Net area = total − doors × door area − windows × window area
Each wall is a rectangle. A gable is the triangle on top of a wall under a pitched roof or vaulted ceiling: half its base times its height.
Doors and windows are subtracted from the total to give the area you'll actually cover. Small openings like outlets and vents aren't worth subtracting.
Worked example
A 12 × 10 ft room with 8 ft walls, a 24 ft wide gable 6 ft high above one end, one door and two windows.
- Walls: (2 × 12 × 8) + (2 × 10 × 8) = 352 sq ft
- Gable: 24 × 6 ÷ 2 = 72 sq ft
- Total: 352 + 72 = 424 sq ft
- Openings: 21 + (2 × 15) = 51 sq ft
Net wall area: 373 sq ft (about 34.7 m²).
Reading your result
Use the net wall area for paint and wallpaper primer. For drywall, pros often skip deducting small windows — the cut-outs are waste anyway.
The 'Total wall area' line is the gross figure some contractors quote by; check which one an estimate uses.
Assumptions
- Walls are flat rectangles; gables are symmetrical triangles.
- Doors are 21 sq ft and windows 15 sq ft unless you change them.
- Openings larger than the wall are capped so the net area never goes below zero.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
Frequently asked questions
How do I calculate the square footage of a wall?
Multiply the width by the height. A 12 ft wall that's 8 ft high is 96 sq ft. Subtract about 21 sq ft for each door and 15 sq ft for each window.
How do I find the area of a gable wall?
Split it into a rectangle and a triangle. The rectangle is width × height to where the slope starts; the triangle is base × peak height ÷ 2. Add them together.
What's the wall area of a 12 × 12 room?
With 8 ft ceilings, 4 × 12 × 8 = 384 sq ft before doors and windows. One door and one window bring it to 348 sq ft.
Should I subtract doors and windows?
For paint and wallpaper, yes. For drywall, it depends: large openings save a sheet, but small windows usually come out of a sheet you'd buy anyway.