How to measure
- Measure the length and width of the bed, path or pad in feet.
- Decide the depth in inches: 2–3 in of mulch, 4–6 in of topsoil for lawns and beds, 4–6 in of gravel for paths and driveways.
- Irregular area? Use the Square Footage Calculator for the area, then multiply by depth — or enter an equivalent rectangle.
- Several identical areas, like matching beds? Set 'How many areas this size' under Advanced options.
How the cubic yard calculation works
Cubic feet = length (ft) × width (ft) × depth (in) ÷ 12 Cubic yards = cubic feet ÷ 27 Weight = cubic yards × tons per cubic yard
Depth is usually given in inches, so it's converted to feet before multiplying. The calculator converts every unit for you.
A cubic yard is 3 × 3 × 3 ft, so there are 27 cubic feet in one.
Weights use typical bulk densities: topsoil ≈ 1.05 tons per cu yd, sand ≈ 1.35, gravel ≈ 1.4, concrete ≈ 2, mulch 400–800 lb. Wet material can weigh 20% more.
Worked example
A 20 × 10 ft garden bed topped with 3 in of topsoil.
- Depth in feet: 3 ÷ 12 = 0.25 ft
- Volume: 20 × 10 × 0.25 = 50 cu ft
- Cubic yards: 50 ÷ 27 = 1.85 cu yd
- Weight: 1.85 × 1.05 = 1.9 tons (about 3,889 lb)
Order about 1.85 cubic yards — most yards sell in half or whole yards, so ask for 2. That's roughly 2 tons: one heavy pickup load or a small delivery.
How much extra to allow
Bulk materials settle or compact once spread. Order a little extra rather than paying a second delivery fee.
| Situation | Allow |
|---|---|
| Topsoil, garden soil | 10–15% (settles) |
| Mulch | 10% (settles and breaks down) |
| Gravel or sand, compacted | 10–15% |
Reading your result
Cubic yards is the order quantity for bulk material. Many suppliers deliver in half-yard steps with a minimum load.
The weight tells you whether your vehicle can haul it. A half-ton pickup's payload runs out at about 1 cu yd of soil or gravel, even though the bed holds more.
Over about 5 cu yd, delivery by dump truck is usually cheaper and quicker than repeated trips.
Assumptions
- The area has a level base and a uniform depth. Low spots take more material.
- Densities are typical for loose, moderately moist material. Suppliers who sell by the ton can give you their exact figure.
- No allowance for settling or compaction is added — see the notes for mulch, gravel and sand.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Retaining walls, driveway bases and fill near foundations need proper compaction and drainage — get local guidance before ordering.
Frequently asked questions
How many cubic feet are in a cubic yard?
27. A cubic yard is 3 ft long, 3 ft wide and 3 ft deep.
How much does a cubic yard of topsoil weigh?
About 1 to 1.1 tons (2,000–2,200 lb) when moderately moist, and more when wet.
How much area does a cubic yard cover?
324 sq ft at 1 in deep, 162 sq ft at 2 in, 108 sq ft at 3 in and 81 sq ft at 4 in.
How many cubic yards fit in a pickup truck?
A full-size bed holds 1–2 cu yd by volume, but heavy material like soil, sand or gravel usually maxes out a half-ton pickup at about 1 cu yd. Mulch is light enough to fill the bed.
How do I convert cubic yards to tons?
Multiply by the material's density in tons per cubic yard: about 1.05 for topsoil, 1.35 for sand, 1.4 for gravel and 2 for concrete.