How to measure
- Measure the room's length and width wall to wall. The ceiling area is the same as the floor area.
- For L-shaped rooms, split the ceiling into rectangles and add each one as a separate room.
- Identify the texture: flat (smooth), light (orange peel or knockdown) or heavy (popcorn or deep stipple).
- Painting several ceilings with the same product? Add them all so the total is rounded once.
How the ceiling paint calculation works
Ceiling area = Σ (length × width) Effective area = ceiling area × texture factor Paint = effective area × coats ÷ coverage Buy = paint × (1 + extra %), rounded up to cans
A flat ceiling is a rectangle: length times width. Texture adds real surface and soaks paint up, so the area is multiplied by 1.2 for light textures like orange peel and knockdown, and 1.5 for popcorn and heavy stipple.
Multiply by coats, divide by the coverage on the can, add a little extra for roller loss, then round up to the containers you can buy.
Worked example
A 14 × 12 ft living room with a light orange-peel ceiling, two coats.
- Ceiling area: 14 × 12 = 168 sq ft
- Texture: 168 × 1.2 = 201.6 sq ft
- Paint: 201.6 × 2 ÷ 350 = 1.15 gallons
- With 10% extra: 1.15 × 1.1 = 1.27 gallons
Buy 2 gallons. The leftover is enough for the next ceiling touch-up — or to do a hallway at the same time.
How much extra to allow
Rolling overhead loses more paint to the roller, tray and drips than walls do, and textured ceilings hold paint in the nap.
| Situation | Allow |
|---|---|
| Flat ceiling, repaint | 10% |
| Light texture | 10–15% |
| Popcorn or heavy stipple | 15% |
Reading your result
The highlighted number is what to buy. 'Effective area' shows how much the texture adds to the job.
When the result is just over a whole gallon, the calculator offers a gallon plus a quart instead.
Use flat ceiling paint unless it's a kitchen or bathroom; flat hides roller marks and imperfections best.
Assumptions
- Coverage of 350 sq ft per gallon. Dedicated ceiling paints often list 350–400; check your can.
- Texture factors are rules of thumb: ×1.2 for light textures, ×1.5 for popcorn and heavy stipple.
- The ceiling is sound and already painted. Water stains and new drywall need primer first.
- Crown molding and walls aren't included.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Popcorn ceilings in homes built before the 1980s may contain asbestos. Have it tested before you scrape, sand or even wet it.
- Ceilings over about 10 ft, stairwells and vaulted ceilings need scaffolding or a pro.
- Recurring stains point to a leak above — fix it before painting.
Frequently asked questions
How much paint do I need for a 12 × 12 ceiling?
144 sq ft. Two coats of a flat ceiling at 350 sq ft per gallon is 0.82 gallons; with 10% extra it's 0.91 — buy 1 gallon.
How much more paint does a popcorn ceiling need?
About 50% more than a flat ceiling. Popcorn texture has far more surface and is porous. Use a thick-nap roller and apply it gently so the texture doesn't loosen.
Can I use wall paint on the ceiling?
Yes, but ceiling paint is usually flatter, thicker and less likely to spatter, and it hides roller lines under raking light. Wall paints with a sheen show every flaw overhead.
Do ceilings need two coats?
A refresh in the same white often needs only one. New drywall, stains, a color change or a patchy first coat call for two.