Skip to content
MeasureToBuy

Paint Calculator

Enter your room's length, width and wall height. The calculator subtracts doors and windows, multiplies by the number of coats, and tells you how many gallons to buy — rounded to real cans.

Measurements

Floor to ceiling.

Coats

Recommended

Extra paint

Covers absorption, roller loss and touch-ups.

Advanced optionscoverage, sizes, custom values
sq ft/gal

Printed on the can. Most wall paints list 250–400 sq ft per gallon (about 6–10 m² per litre).

A standard 3 × 7 ft door is 21 sq ft.

A typical 3 × 5 ft window is 15 sq ft.

Your estimate

You need about 3 gallons of paint.

2.09 gal calculated for 365 sq ft at 2 coats, plus 10% extra.

Wall area
416 sq ft
Doors & windows
-51 sq ft
Paintable wall area
365 sq ft
Coats
2 coats
Coverage
350 sq ft/gal
Extra
10%
Wall paint calculated
2.09 gal
Wall paint with 10% extra
2.29 gal
Buy3 × 1-gal can
3 gal
Walls, unfolded
WALL A14 ftWALL B12 ftWALL C14 ftWALL D12 ft8 ft8 ft
Wall area = 2 × (14 ft + 12 ft) × 8 ft. Doors (solid) and windows (dashed) are subtracted.

Next step

Estimate the cost

You need approximately 3 gal. Add prices for paint, primer and supplies to see the material cost.

Estimate paint cost

Also useful

Check whether you need primer

New drywall, patched walls and big color changes need a coat of primer first.

Calculate primer

How to measure

  1. Measure the length and width of the room along the floor, wall to wall. Round up to the nearest half foot.
  2. Measure wall height from floor to ceiling. For vaulted ceilings, use the average height or use the Wall Area Calculator for each wall.
  3. Count doors and windows. Leave out small openings like vents and outlets — they don't save meaningful paint.
  4. Painting several rooms the same color? Add each room so the total is rounded once, not per room.

How the paint calculation works

Wall area       = 2 × (length + width) × height
Paintable area  = wall area − (doors × 21 sq ft) − (windows × 15 sq ft)
Paint (gallons) = paintable area × coats ÷ coverage per gallon
Buy             = paint × (1 + extra %), rounded up to cans

A room's walls unfold into one long rectangle: its length is the room's perimeter and its height is the ceiling height. That is the gross wall area.

Each door and window removes a patch of wall. The calculator uses 21 sq ft for a standard 3 × 7 ft door and 15 sq ft for a typical window; change these under Advanced options if yours are unusual.

Multiply by coats, divide by the coverage printed on the can, then add a little extra for absorption, roller loss and touch-ups. The final step rounds up to the containers you can actually buy, preferring a 5-gallon bucket when it leaves the least paint over.

Worked example

A 14 × 12 ft bedroom with 8 ft ceilings, one door and two windows, painted with two coats.

  1. Wall area: 2 × (14 + 12) × 8 = 416 sq ft
  2. Openings: 21 + (2 × 15) = 51 sq ft
  3. Paintable area: 416 − 51 = 365 sq ft
  4. Paint: 365 × 2 ÷ 350 = 2.09 gallons
  5. With 10% extra: 2.09 × 1.1 = 2.29 gallons

Buy 3 gallons. The extra two-thirds of a gallon is your touch-up supply — label it with the room and color.

How much extra to allow

Paint doesn't get cut like flooring, but some is always lost: it soaks into the roller and tray, the first coat absorbs more than the second, and you'll want some left for touch-ups.

SituationAllow
Repaint, same color, smooth walls5–10%
Typical repaint, color change10%
New drywall, textured walls, deep colors15%

Reading your result

The highlighted number is what to put in your cart. The calculated amount above it is the paint that will actually go on the walls.

If the calculator suggests a 5-gallon bucket, it is because one bucket leaves less paint over than the equivalent gallons. Buckets also keep the color consistent across the whole job.

For deep reds, yellows and other low-hide colors, plan on three coats or a tinted primer.

Assumptions

  • Coverage of 350 sq ft per gallon, the middle of the 250–400 range printed on most interior wall paint. Use the number on your can for a tighter estimate.
  • Walls are flat, smooth and already primed. Fresh drywall, bare plaster and textured walls absorb more and cover less.
  • Ceilings are estimated separately because ceiling paint is usually a different product.
  • Trim, doors and window casings are not included. Use the Interior Paint Calculator to estimate them.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Walls over about 12 ft, stairwells and anything needing a ladder on stairs are usually worth a professional quote.
  • Homes built before 1978 may have lead paint. Test before sanding or scraping.

Frequently asked questions

How much paint do I need for a 12 × 12 room?

With 8 ft ceilings, a 12 × 12 room has 384 sq ft of wall. After one door and one window, about 348 sq ft is paintable. Two coats need roughly 2 gallons, so buy 2 gallons — or 3 if the walls are textured or you're making a big color change.

Is one gallon of paint enough for a room?

One gallon covers about 350 sq ft with one coat. That is enough for one coat in a small bedroom or a bathroom, but most rooms need two coats, which means 2 gallons or more.

Should I subtract doors and windows?

Yes for an accurate estimate — a door and two windows remove about 50 sq ft, close to a third of a gallon at two coats. The calculator does it for you.

How much paint do I need for the ceiling?

The ceiling area equals the floor area: length × width. Turn on 'Include the ceiling' and the calculator estimates ceiling paint as a separate purchase.

Does primer count as a coat?

No. Primer seals and evens out the surface; count only the finish coats. Use the Primer Calculator for the primer itself.

More painting calculators

All painting