How to measure
- Measure each room wall to wall at the longest and widest points. Add closets and bathrooms as separate rooms.
- For plank or tile, read the coverage per box from the label — typically 20–30 sq ft.
- For sheet vinyl, check the roll width with the store. 12 ft is standard in the US, 4 m in metric markets.
- Sheet vinyl is cleanest with no seams: note which rooms are wider than the roll.
How the vinyl flooring calculation works
Plank: boxes = floor area × (1 + waste %) ÷ coverage per box, rounded up
Sheet: strips = shorter wall ÷ roll width, rounded up
length = strips × (longer wall + 3 in at each end)
area bought = length × roll widthVinyl plank is counted like any boxed flooring: floor area plus waste, rounded up to whole boxes.
Sheet vinyl is cut from a roll, so you buy a length, not boxes. The calculator runs strips along the longer wall and adds 3 in at each end for trimming. A room wider than the roll needs a second strip and a seam.
Worked example
A 16 × 12 ft kitchen, first as vinyl plank at 24 sq ft per box with 10% waste, then as sheet vinyl from a 12 ft roll.
- Floor area: 16 × 12 = 192 sq ft
- Plank: 192 × 1.1 = 211.2 ÷ 24 = 8.8 → 9 boxes (216 sq ft)
- Sheet: 12 ft wall ÷ 12 ft roll = 1 strip, no seam
- Sheet length: 16 ft + 3 in + 3 in = 16.5 ft → 198 sq ft bought
Buy 9 boxes of plank, or 16 ft 6 in of 12 ft-wide sheet vinyl. With plank the last box is almost fully used, so a tenth box is worth considering.
How much extra to allow
Plank waste follows the layout. Sheet vinyl has no waste percentage — the roll width decides it.
| Situation | Allow |
|---|---|
| Plank, straight lay | 10% |
| Plank, diagonal or many corners | 15% |
| Sheet vinyl, room narrower than the roll | Roll width × trim — usually 3–15% |
Reading your result
For plank, buy the highlighted box count from a single lot.
For sheet vinyl, the store cuts the length shown off the roll. Ask them to roll it face-out to avoid creases.
If a room needs a seam, plan it away from the sink, dishwasher and doorways.
Assumptions
- Rectangular rooms. Split L-shapes into rectangles.
- Vinyl plank with attached pad needs no separate underlayment; floating plank still needs the expansion gap at walls.
- Sheet strips are cut at full roll width with 3 in (75 mm) trim at each end.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Glue-down sheet vinyl and seam welding are best left to an installer.
- Vinyl over old resilient flooring may contain asbestos in homes built before 1980. Test before removing the old floor.
Frequently asked questions
How many boxes of vinyl plank do I need for a 12 × 12 room?
144 sq ft plus 10% waste is 158.4 sq ft. At 24 sq ft per box that's 6.6, so buy 7 boxes.
Do I need underlayment under vinyl plank?
Not if the planks have attached pad. Over concrete, check whether the manufacturer requires a vapor barrier.
How is sheet vinyl sold?
By the running foot (or metre) off a 12 ft or 4 m roll, often priced per square foot or square yard of the piece cut.
Is vinyl plank waterproof?
Most rigid-core LVP is waterproof on top, but water can still get under it at the edges. Seal around tubs and leave the expansion gap.