How to measure
- Measure the floor length and width, or a wall's width and height, in feet.
- Note the tile size, the grout joint and the tiles per box from the label.
- Pick the trowel notch the tile needs: ¼ × ¼ in for small tile, ¼ × ⅜ in for 8–16 in, ½ × ½ in for large-format.
- Decide if you need backer board: on most floors over wood and on any wet wall.
How the tile cost calculation works
Tile cost = boxes × tiles per box × tile area × price per sq ft (or boxes × price per box) Thinset bags = area × 1.1 ÷ coverage per 50 lb bag (90 / 65 / 40 sq ft by trowel), rounded up Grout bags = grout weight × 1.1 ÷ 25 lb, rounded up Backer board = area × 1.1 ÷ 15 sq ft per 3 × 5 ft sheet, rounded up Total = tile + thinset + grout + backer board
Tile is priced on the boxes you buy, so the tile line is based on whole boxes after waste, not the bare floor area.
Thinset coverage depends on the trowel notch: the bigger the notch, the more mortar each square foot takes. Grout comes from the actual joint volume for your tile size, joint and thickness.
Backer board comes in 3 × 5 ft sheets; 10% extra covers cuts around the edges.
Worked example
An 8 × 5 ft bathroom floor in 12 × 12 in tile at $4 per sq ft, ⅛ in joints, 10 per box, ¼ × ⅜ in trowel, with backer board.
- Tile: 44 tiles with waste → 5 boxes × 10 × 1 sq ft × $4 = $200
- Thinset: 40 × 1.1 = 44 sq ft ÷ 65 → 1 bag × $28 = $28
- Grout: about 2.5 lb → 1 × 25 lb bag × $24 = $24
- Backer board: 44 ÷ 15 = 2.9 → 3 sheets × $14 = $42
- Total: $200 + $28 + $24 + $42 = $294
Expect about $294 in materials. Prices here are placeholders — enter what your store charges.
How much extra to allow
Waste is bought, so it's in the cost. Diagonal and large-format layouts raise both tile and thinset slightly.
| Situation | Allow |
|---|---|
| Straight lay, small or medium tile | 10% |
| Diagonal lay | 15% |
| Herringbone, or large-format tile in a small room | 15–20% |
Reading your result
The highlighted total is your material budget for this surface. Run it again for walls with their own tile.
On a small job, setting materials can be a third of the cost — a single bag of each is often more than you need, but it's the smallest size sold.
Labor for tile is usually quoted per square foot and varies more with layout and tile size than with the tile price.
Assumptions
- Prices are user-entered; the defaults are examples only.
- Thinset coverage per 50 lb bag: about 90 sq ft with a ¼ × ¼ in notch, 65 with ¼ × ⅜ in, 40 with ½ × ½ in. Check your bag.
- Backer board screws, seam tape, waterproofing, trim and labor are not included.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Showers and wet floors need waterproofing beyond backer board. Budget for a membrane or have a pro build the shower.
- Large-format tile (24 in and up) needs a flat substrate and often a leveling system — installers charge more for it.
Frequently asked questions
How much does it cost to tile a small bathroom floor?
For 40 sq ft of $4 tile, about $300 in materials including thinset, grout and backer board. Labor is extra.
How many bags of thinset do I need?
About one 50 lb bag per 65 sq ft with a ¼ × ⅜ in notch. Small tile with a ¼ × ¼ in notch goes further; large-format tile with a ½ in notch needs more.
Do I need backer board on a floor?
Over a wood subfloor, yes — cement board or an uncoupling membrane. Over a sound concrete slab you can usually tile directly.
Should I price tile per box or per square foot?
Use whichever the store shows. The calculator gives the same total either way if the two prices agree.