How to measure
- Measure each room wall to wall at floor level, at the longest and widest points. Round up to the next inch.
- Include closets and the floor under appliances that will sit on the new floor (like a freestanding range).
- For L-shaped rooms, split them into two rectangles and add each as a separate room.
- Read the coverage per box from the product label — it varies from about 15 to 30 sq ft for planks.
How the flooring calculation works
Floor area = Σ (length × width) for each room With waste = floor area × (1 + waste %) Boxes = with waste ÷ coverage per box, rounded up
Each room is a rectangle, so its area is length times width. Rooms are added before rounding so a few square feet left over in one room don't each cost an extra box.
Waste covers the pieces cut off at walls, offcuts too short to reuse, and boards with defects. The right percentage depends on the layout: straight lays waste least, diagonal and herringbone patterns waste more because every edge piece is cut at an angle.
Stores only sell whole boxes, so the final number always rounds up.
Worked example
A 16 × 12 ft living room in laminate, laid straight, with 20 sq ft per box.
- Floor area: 16 × 12 = 192 sq ft
- With 10% waste: 192 × 1.1 = 211.2 sq ft
- Boxes: 211.2 ÷ 20 = 10.56 → 11 boxes
Buy 11 boxes (220 sq ft). You'll have roughly a box worth of offcuts and spares — keep the unopened remainder for repairs.
How much extra to allow
Waste isn't a fudge factor — it's where your cuts come from. Smaller rooms and more corners mean a larger share of each board ends up as an offcut.
| Situation | Allow |
|---|---|
| Large, square rooms, straight lay | 5–7% |
| Typical rooms, straight lay | 10% |
| Diagonal layout or many corners | 15% |
| Herringbone or chevron | 20%+ |
Reading your result
The highlighted number is boxes to buy. 'Area purchased' is what those boxes cover, so you can compare against the floor area and see your spare.
If your last box is almost fully used, buying one more is cheap insurance against a miscut or a damaged board.
Buy every box from the same production lot so colour and texture match.
Assumptions
- Rooms are rectangular. For angled walls or bay windows, measure to the furthest point or split the space into rectangles and triangles with the Square Footage Calculator.
- Coverage per box is the net area the boards cover once installed, as printed on the label.
- Underlayment rolls butt together without overlap, plus 5% for trimming.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
When to call a professional
- Uneven subfloors, moisture problems or concrete slabs that need levelling should be assessed before buying flooring.
- Solid hardwood over radiant heat, and glue-down installs, usually need a professional installer and the manufacturer's specification.
Frequently asked questions
How much flooring do I need for a 12 × 12 room?
144 sq ft of floor. With 10% waste that's 158.4 sq ft — 8 boxes at 20 sq ft per box.
Do I include closets?
Yes, if the new floor continues into them. Add each closet as its own room so the total stays accurate.
Why is my waste more than 10%?
Diagonal and herringbone layouts, small rooms like bathrooms and hallways, and long planks in short rooms all produce more offcuts. 15–20% is normal in those cases.
Should I buy extra flooring?
Keep at least one unopened box after the install. Discontinued colours are almost impossible to match if a board is damaged later.