Skip to content
MeasureToBuy

Board Foot Calculator

List your boards by thickness, width, length and quantity. The calculator totals the board feet and cubic volume, and prices the list by the board foot or by volume.

Measurements

Hardwood quarters: 4/4 = 1 in, 5/4 = 1¼, 8/4 = 2 in.

Your estimate

Your list is 40 board feet — 3.33 cu ft of wood.

Board feet = thickness (in) × width (in) × length (in) ÷ 144, per piece, times the number of pieces.

Board size
1 in × 6 in × 8 ft
Board feet per piece
4 board ft
Pieces
10
Total board feet
40 board ft
Volume
3.33 cu ft
Linear length
80 ft
  • Hardwood is sold by nominal rough thickness (4/4 = 1 in) and measured before planing, so use the quarter size, not the planed thickness.
  • Softwood dimensional lumber is named by nominal size: a 2×4 is actually 1½ × 3½ in. Yards price it per piece or per linear foot, but board feet use the nominal 2 × 4.
Board · section and length
6 in1 inEND8 ftFACE · × 10
Board feet = 1 in × 6 in × 8 ft (in inches) ÷ 144 × 10.

Next step

Building a deck?

Count deck boards, joists and screws from the deck size instead of listing every board.

Decking calculator

How to measure

  1. Thickness: for rough hardwood, use the quarter size — 4/4 is 1 in, 5/4 is 1¼ in, 8/4 is 2 in. For dimensional lumber, use the nominal size (2 in for a 2×4).
  2. Width: measure across the face, or use the nominal width for dimensional lumber.
  3. Length: the length you'll buy, in feet. Hardwood is often sold random-length — measure each board or use an average.
  4. Add one line per size, with the number of pieces.

How the board foot calculation works

Board feet (one piece) = thickness (in) × width (in) × length (in) ÷ 144
                       = thickness (in) × width (in) × length (ft) ÷ 12
Total board feet       = Σ board feet × pieces
Cubic feet             = board feet ÷ 12
Cost                   = board feet × price per board foot

A board foot is a piece 1 in thick, 12 in wide and 12 in long — 144 cubic inches. It measures volume, not length, so a 2 in thick board has twice the board feet of a 1 in board of the same face size.

Hardwood dealers price by the board foot using the rough thickness before planing. Softwood dimensional lumber is named by nominal size: a 2×4 is actually 1½ × 3½ in, but board feet are still calculated on 2 × 4.

Twelve board feet make one cubic foot; one cubic metre is about 424 board feet.

Worked example

Ten 4/4 oak boards, 6 in wide and 8 ft long, at $6 per board foot.

  1. One board: 1 × 6 × 96 ÷ 144 = 4 board feet
  2. Ten boards: 4 × 10 = 40 board feet
  3. Volume: 40 ÷ 12 = 3.33 cu ft
  4. Cost: 40 × $6 = $240

The list is 40 board feet, about $240 at $6 per board foot.

How much extra to allow

Board feet measure what you buy, not what ends up in the project. Knots, checks at the ends, and planing to thickness all cost volume.

SituationAllow
Construction lumber10%
Select hardwood, simple parts15–20%
Common grade hardwood, figured or matched parts30–40%

Reading your result

The headline is the total board feet for the whole list. Use it to compare dealer quotes or to check an invoice.

The cost uses your price per board foot or per volume. Dimensional softwood at a home center is usually priced per piece — divide that price by the board's board feet to compare.

Assumptions

  • Thickness and width are nominal (rough) sizes, as lumber is priced. Planed lumber has less wood than its board-foot figure suggests.
  • No waste is added. For furniture, add 20–30% for defects, grain matching and planing; for rough framing, 10%.
  • Prices are your own numbers; board-foot prices vary widely by species and grade.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

Frequently asked questions

How do you calculate board feet?

Multiply thickness (in) × width (in) × length (in) and divide by 144. With the length in feet, multiply thickness × width × length and divide by 12.

How many board feet is a 2×4×8?

2 × 4 × 8 ÷ 12 = 5.33 board feet, using the nominal 2 × 4 size.

What does 4/4 mean in hardwood?

Quarters of an inch of rough thickness: 4/4 is 1 in, 5/4 is 1¼ in, 6/4 is 1½ in, 8/4 is 2 in. 4/4 usually planes to about ¾ in.

How many board feet are in a cubic meter?

About 424 (423.8). One board foot is 0.00236 m³.

More lumber & carpentry calculators

All lumber & carpentry