How to measure
- Measure each room's length and width at floor level. For L-shaped rooms, add the extra wall as another room or count the outside corner.
- Count the doors in each room and measure one opening including the casing.
- Count outside corners — walls that stick out into the room, like a chimney breast.
How the baseboard calculation works
Baseboard = Σ room perimeters − doors × door width To buy = baseboard × (1 + waste) Pieces = to buy ÷ stock length, rounded up Inside corners = 4 per room + outside corners
Baseboard runs around the room and stops at each door casing, so door openings come off the perimeter. Waste covers the miter and cope cuts at every corner and offcuts too short to use.
Every outside corner in an otherwise rectangular room adds one inside corner as well.
Worked example
A 14 × 12 ft room with one 3 ft door, bought in 16 ft lengths with 10% waste.
- Perimeter: 2 × (14 + 12) = 52 ft
- Less the door: 52 − 3 = 49 ft
- With waste: 49 × 1.10 = 53.9 ft
- Pieces: 53.9 ÷ 16 = 3.4 → 4 lengths
Buy 4 lengths of 16 ft baseboard and plan 4 inside corners.
How much extra to allow
Each corner costs a few inches, and short walls leave offcuts. Rooms with many corners or first-time miter cutting need more.
| Situation | Allow |
|---|---|
| Large rooms, few corners | 5% |
| Typical rooms | 10% |
| Many corners, first project | 15% |
Reading your result
The pieces row is your order. Buying longer lengths avoids joints on long walls — check your car can carry them.
Paint or prime the baseboard before installing to save time on the wall.
Assumptions
- Rooms are rectangles; enter extra walls as separate rooms.
- Offcuts are reused on short walls.
- Waste percentages are rules of thumb — Home Depot simply advises buying extra in case of bad cuts.
Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.
Frequently asked questions
How do I calculate how much baseboard I need?
Add up each room's perimeter (2 × length + 2 × width), subtract the width of each door opening, add about 10% for cuts, and divide by the length of the boards you'll buy.
Should I cope or miter inside corners?
Coping (cutting the profile of one piece to fit against the other) hides gaps when walls aren't square. Outside corners are always mitered.
What lengths does baseboard come in?
Commonly 8, 12 and 16 ft in the US. Longer boards mean fewer joints along long walls.