Skip to content
MeasureToBuy

Gravel Calculator

Enter the area, depth and type of stone. You'll get cubic yards, the weight in tons that quarries sell by, and a bag count for small paths and repairs.

Measurements

Area shape

Measure length × width; add more for L-shapes

Paths 2–3 in. Driveways 4–6 in, laid and compacted in 2–3 in layers.

Your estimate

You need about 3.46 tons of crushed stone (2.47 cu yd).

200 sq ft × 4 in = 2.47 cu yd.

Area
200 sq ft
Depth
4 in
Gravel volume
2.47 cu yd
Volume to order67 cu ft
2.47 cu yd
Weight to orderat ≈ 1.4 tons per cu yd
3.46 tons
0.5 cu ft bagsfor small jobs only
134 bags
  • Spread and compact deep bases in 2–3 in layers with a plate compactor for a firm surface.
  • Quarries sell by the ton; densities vary with stone and moisture, so ask your supplier for their weight per yard.
Area · plan and section
20 ft10 ftPLANSECTION4 inGROUND
Volume = 20 ft × 10 ft × 4 in. The section is drawn deeper than scale so the depth is visible.

Next step

Pouring a slab on this base?

The slab calculator works out the concrete, rebar and the gravel base together.

Concrete slab calculator

Also useful

Mulching the beds beside it?

The same areas carry over to the mulch calculator.

Mulch calculator

How to measure

  1. Measure the length and width of the path, driveway or pad. Split bends and L-shapes into rectangles.
  2. Pick the finished depth: 2–3 in for paths and decorative beds, 4–6 in for driveways, 4 in under a slab or shed.
  3. For driveways and paver bases, plan to lay and compact the stone in 2–3 in layers.

How the gravel calculation works

Volume      = area × depth
Order       = volume × 1.15   (if compacting)
Cubic yards = cubic feet ÷ 27
Tons        = cubic yards × density

Gravel is ordered by the ton, but you measure it by volume. Density depends on the stone: pea gravel and #57 crushed stone weigh about 1.4 tons per cubic yard, crusher run about 1.5–1.6 because its fines fill the gaps, and large river rock about 1.35.

A compacted base loses volume as the stones lock together, so turn on the 15% compaction allowance for driveways, paver bases and slab bases.

Worked example

A 20 × 10 ft parking pad, 4 in of #57 crushed stone.

  1. Area: 20 × 10 = 200 sq ft
  2. Volume: 200 × (4 ÷ 12) = 66.7 cu ft
  3. In cubic yards: 66.7 ÷ 27 = 2.47 cu yd
  4. Weight: 2.47 × 1.4 = 3.46 tons

Order about 3.46 tons of crushed stone (2.47 cubic yards). In 0.5 cu ft bags that would be 134 bags — a delivery is far easier.

How much extra to allow

Gravel doesn't have offcuts, but it does compact and sink into soft ground. Use the compaction allowance for bases, and order a little extra over clay or freshly dug soil.

SituationAllow
Decorative layer, paths0%
Compacted driveway or paver base15%
Over soft or freshly dug ground15–20%

Reading your result

The highlighted row is what to order: tons for deliveries, bags for jobs under about half a yard.

Most quarries have a minimum load; ask about delivery fees and whether they'll spread it.

Lay landscape fabric under decorative gravel to keep it from sinking into the soil.

Assumptions

  • Densities are typical supplier figures in short tons per loose cubic yard. Wet stone and different quarries vary by ±10%.
  • Compaction allowance of 15% for bases that are compacted with a plate compactor.
  • Bags hold 0.5 cu ft in the US and 25 kg in metric markets.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Driveways on clay or wet ground, or carrying heavy trucks, may need excavation, geotextile and a thicker base — a contractor can test the subgrade.

Frequently asked questions

How much does a cubic yard of gravel weigh?

About 1.4 tons (2,800 lb) for pea gravel or #57 crushed stone, and 1.5–1.6 tons for compacted crusher run.

How deep should gravel be for a driveway?

4–6 in of compacted stone, laid in 2–3 in layers. New driveways on soft ground often use a deeper base of larger stone underneath.

How much area does a ton of gravel cover?

At 2 in deep, a ton of #57 stone covers about 115 sq ft; at 4 in, about 58 sq ft.

What's the difference between #57 stone and crusher run?

#57 is washed, angular stone about ¾–1 in, which drains well. Crusher run includes stone dust that packs hard, making it the usual driveway and paver base.

More landscaping & hardscaping calculators

All landscaping & hardscaping