Skip to content
MeasureToBuy

Roof Area Calculator

Enter the building's length and width, the eave overhang, pitch and roof style. The calculator turns the footprint into sloped roof area and roofing squares, and lists rafter length and edge lengths.

Footprint-and-pitch estimates suit simple gable and hip roofs. Roofs with dormers, multiple pitches or many valleys should be measured by a roofer.

Measurements

Along the ridge / eaves.

Eave to eave across the slopes.

Added to every edge. 0 if you measured at the drip edge.

Rise in inches per foot of run. Count it with a level and tape, or from the plans.

Roof style

Two slopes, triangular ends

Your estimate

Your roof is about 1,503 square feet — 15.0 squares.

A 1,344 sq ft footprint × 1.118 for a 6/12 pitch.

Footprint incl. overhang42 ft × 32 ft
1,344 sq ft
Pitch
6/12 · 26.6°
Pitch multiplier
1.12
Roof surface area
1,503 sq ft
Roofing squares
15 squares
Rafter length (eave to ridge)
17.9 ft
Ridge height above eaves
8 ft

Edges

Ridge
42 ft
Eaves
84 ft
Rakes
72 ft
Roof · end elevation and plan
run ½ 30 ftrise 6/12RAFTER40 ft30 ftPLAN · GABLE
A 6/12 roof rises 6 in for every 12 in of run (26.6°). Sloped area = footprint × 1.118.

Next step

Turn the area into materials

Your roof is about 1,503 sq ft. Next: shingle bundles, underlayment, ridge cap and drip edge.

Roofing calculator

How to measure

  1. Measure the building's length and width at the outside of the walls — easier from the ground than on the roof.
  2. Measure the overhang: how far the eaves and rakes stick out past the walls, usually 12–24 in. Enter 0 if you measured at the drip edge.
  3. Find the pitch: hold a level horizontally against the roof or a rafter, measure 12 in along it, then measure straight up to the roof. That rise over 12 is the pitch.
  4. Note the style: gable (two slopes, triangular ends), hip (four slopes) or shed (one slope).

How the roof area calculation works

Footprint     = (length + 2 × overhang) × (width + 2 × overhang)
Pitch factor  = √(1 + (rise ÷ 12)²)
Roof area     = footprint × pitch factor
Squares       = roof area ÷ 100 sq ft
Rafter        = (width ÷ 2 + overhang) × pitch factor

A roof slope is longer than the ground it covers. The pitch factor is the sloped length for each foot of horizontal run — 1.118 at 6/12 — so multiplying the footprint by it gives the true surface area.

When every plane has the same pitch, the result is the same for gable and hip roofs: the hip's triangular ends add exactly what the shorter ridge takes away.

Roofers count area in squares of 100 sq ft, which is how shingles, underlayment and labour are priced.

Worked example

A 40 × 30 ft house with 12 in overhangs and a 6/12 gable roof.

  1. Footprint with overhang: (40 + 2) × (30 + 2) = 42 × 32 = 1,344 sq ft
  2. Pitch factor for 6/12: √(1 + 0.5²) = 1.118
  3. Roof area: 1,344 × 1.118 = 1,503 sq ft
  4. Squares: 1,503 ÷ 100 = 15.0 squares
  5. Rafter: 16 ft run × 1.118 = 17.9 ft; ridge 8 ft above the eaves

The roof is about 1,503 sq ft — 15.0 squares — with 42 ft of ridge, 84 ft of eaves and 72 ft of rakes.

Reading your result

Use the area and squares to order materials or compare roofing quotes, which are usually priced per square.

Edge lengths feed the accessories: ridge cap along ridges and hips, starter strip and drip edge along eaves and rakes.

Assumptions

  • One pitch on every roof plane. Mixed pitches, dormers and porch roofs need their own measurements, added together.
  • Overhang is the same on all sides.
  • The area is the roof surface only. Waste for shingles is added in the Roofing and Shingle calculators.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Measuring on the roof is dangerous on steep or wet roofs. Ground measurements and the pitch factor are accurate enough for estimates; roofers can order aerial measurement reports for complex roofs.

Frequently asked questions

How do I calculate roof area from the footprint?

Multiply the footprint, including overhangs, by the pitch factor: 1.054 for 4/12, 1.118 for 6/12, 1.202 for 8/12, 1.414 for 12/12.

How many squares is a 2,000 sq ft house?

It depends on pitch and overhang. A 2,000 sq ft single-storey footprint at 6/12 with no overhang is 2,000 × 1.118 = 2,236 sq ft, about 22.4 squares.

Does a hip roof have more area than a gable roof?

Not with the same footprint and pitch — the area is identical. A hip roof does have more ridge and hip length, and more cutting waste.

What does 6/12 pitch mean?

The roof rises 6 in for every 12 in of horizontal run, about 26.6°.

More roofing, siding & gutters calculators

All roofing, siding & gutters