Skip to content
MeasureToBuy

Roofing Cost Calculator

Enter the building footprint, overhang and pitch, then your prices. The calculator works out every shingle-roof material — bundles, ridge cap, starter, underlayment, drip edge and nails — and totals the cost.

Footprint-and-pitch estimates suit simple gable and hip roofs. Roofs with dormers, multiple pitches or many valleys should be measured by a roofer.

Measurements

Along the ridge / eaves.

Eave to eave across the slopes.

Added to every edge. 0 if you measured at the drip edge.

Rise in inches per foot of run. Count it with a level and tape, or from the plans.

Roof style

Two slopes, triangular ends

Waste allowance

Cut-offs at hips, valleys and rakes. Hip roofs need more than gables.

Advanced optionscoverage, sizes, custom values
Bundles per square

Most architectural and 3-tab shingles

Underlayment

10 squares per roll

Your prices

Enter what your store charges. Example prices are placeholders, not quotes.

per bundle
per bundle
per bundle
per roll
per 10 ft piece
per box (7,200)

Your estimate

Expect about $2,665 in shingle-roof materials.

1,503 sq ft of roof = 15.0 squares, plus 10% waste, at 3 bundles per square.

Footprint incl. overhang42 ft × 32 ft
1,344 sq ft
Pitch
6/12 · 26.6°
Pitch multiplier
1.12
Roof surface area
1,503 sq ft
Roofing squares
15 squares
Waste allowance
10%
Squares with waste
16.5 squares
Shingle bundles3 per square
50 bundles

Accessories

Ridge cap42 ft of ridge
2 bundles
Starter strip156 ft of eaves and rakes
2 bundles
Underlayment10 squares per roll
2 rolls
Drip edge10 ft pieces
17 pieces
Roofing nails1 coil box of 7,200
5,290 nails

Material cost

Shingles
$2,000
Ridge cap
$130.00
Starter strip
$100.00
Underlayment
$220.00
Drip edge
$170.00
Nails
$45.00
Estimated material cost
$2,665
Per square
$161.23
  • Tear-off disposal, flashing, vents and ice-and-water shield in valleys are not included.
Roof · end elevation and plan
run ½ 30 ftrise 6/12RAFTER40 ft30 ftPLAN · GABLE
A 6/12 roof rises 6 in for every 12 in of run (26.6°). Sloped area = footprint × 1.118.

Next step

Turn this into a project plan

Keep the roof measurements, materials and prices together in one printable summary.

Start the Replace a Roof project

How to measure

  1. Measure the building's length and width at the walls, and how far the eaves overhang.
  2. Find the pitch with a level and tape: the rise in inches over 12 in of horizontal run.
  3. Get prices per bundle, roll, piece and box from your supplier. The defaults are placeholders, not local prices.

How the roofing cost calculation works

Roof area      = footprint incl. overhang × pitch factor
Squares        = roof area ÷ 100 × (1 + waste)
Bundles        = squares × bundles per square, rounded up
Underlayment   = squares ÷ squares per roll, rounded up
Drip edge      = (eaves + rakes) × 1.05 ÷ 10 ft, rounded up
Cost           = Σ quantity × your price

The footprint times the pitch factor gives the sloped roof area. Waste is added in squares, and each material is rounded up to whole packages before it's priced — you pay for the whole roll, not the part you use.

Ridge cap is priced from the ridge and hip length, starter strip and drip edge from the eaves and rakes, and nails at about 320 per square in 7,200-count coils.

Worked example

A 40 × 30 ft gable roof at 6/12 with 12 in overhangs, 10% waste, synthetic underlayment, at $40 per bundle, $65 ridge cap, $50 starter, $110 per roll, $10 drip edge and $45 nails.

  1. Roof area: 42 × 32 = 1,344 × 1.118 = 1,503 sq ft = 15.0 squares; with waste 16.5 squares
  2. Shingles: 16.5 × 3 = 49.6 → 50 bundles × $40 = $2,000
  3. Ridge cap 2 × $65 = $130; starter 2 × $50 = $100
  4. Underlayment 2 rolls × $110 = $220; drip edge 17 × $10 = $170; nails 1 box = $45
  5. Total: $2,000 + $130 + $100 + $220 + $170 + $45 = $2,665

Expect about $2,665 in materials — roughly $161 per square — before tear-off, disposal, flashing and labour.

How much extra to allow

Waste is added to the squares, so it raises the shingle, underlayment and nail counts together.

SituationAllow
Simple gable10%
Hip roof15%
Valleys, dormers20%

Reading your result

The headline is the material total. The cost table shows each line, so you can swap in a supplier quote for any item.

The per-square figure helps compare against quotes: installed prices per square include labour and disposal, which often cost more than the materials.

Assumptions

  • Material cost only, at your prices. Labour, tear-off, dumpster, permits and decking repairs are not included.
  • One pitch on every plane; underlayment rolls cover 10 squares (synthetic), 4 (#15 felt) or 2 (#30 felt).
  • Flashing, vents, ice-and-water shield and valley metal are not included.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Most reroofs are done by professional crews. Use this estimate to check the materials portion of a quote, not as a full project price.
  • Steep or high roofs need fall protection; damaged decking needs a roofer to assess it.

Frequently asked questions

How much do shingles cost per square?

Multiply your bundle price by the bundles per square — at $40 a bundle and 3 per square, $120 per square for shingles alone, before accessories.

What's included in roofing material cost?

Shingles, ridge cap, starter strip, underlayment, drip edge and nails. Flashing, vents, ice-and-water shield and disposal are extra.

Why is my roof estimate higher than the footprint suggests?

The slope adds area (12% at 6/12), overhangs add more, and waste adds 10–20%. A 40 × 30 ft house with 12 in overhangs needs 16.5 squares of shingles, not 12.

More roofing, siding & gutters calculators

All roofing, siding & gutters