Skip to content
MeasureToBuy

Shingle Calculator

Already know your roof area or squares? Enter it with the ridge and eave lengths to get shingle bundles, ridge cap and starter strip.

Measurements

Start from

Sloped surface area, not the footprint.

Total length of ridges and hips for ridge cap.

Perimeter edges that get starter strip.

Waste allowance

Cut-offs at hips, valleys and rakes. Hip roofs need more than gables.

Advanced optionscoverage, sizes, custom values
Bundles per square

Most architectural and 3-tab shingles

Your estimate

You need 70 bundles of shingles.

2,100 sq ft of roof = 21.0 squares, plus 10% waste, at 3 bundles per square.

Roof area
2,100 sq ft
Roofing squares
21 squares
Waste allowance
10%
Squares with waste
23.1 squares
Shingle bundles3 per square
70 bundles

Accessories

Ridge cap40 ft of ridge
2 bundles
Starter strip140 ft of eaves and rakes
2 bundles
  • Tear-off disposal, flashing, vents and ice-and-water shield in valleys are not included.

Next step

Don't know the roof area?

Start from the building footprint and pitch instead — the roofing calculator works out the area and every accessory.

Roofing calculator

How to measure

  1. Roof area is the sloped surface, not the footprint. A roofer's quote or an aerial report lists it in squares; otherwise use the Roof Area Calculator.
  2. Ridge and hip length: add the length of every ridge and hip — each gets ridge cap shingles.
  3. Eaves and rakes length: add the bottom edges and the sloped gable edges — each gets starter strip.

How the shingle calculation works

Squares          = roof area ÷ 100 sq ft
Bundles          = squares × (1 + waste) × bundles per square, rounded up
Ridge cap        = ridge and hip length ÷ 33 ft per bundle, rounded up
Starter strip    = eaves and rakes length ÷ 105 ft per bundle, rounded up

Shingles are sold by the bundle and estimated by the square — 100 sq ft of roof. Most architectural and 3-tab shingles take three bundles per square; some heavy designer shingles take four or five. The wrapper says which.

Waste is added to the squares before converting to bundles, and the bundle count rounds up once at the end.

Ridge cap and starter strip are separate products estimated by length. Coverage per bundle varies by brand — about 33 ft of ridge and 105 ft of starter are typical.

Worked example

A 2,100 sq ft roof with 40 ft of ridge, 140 ft of eaves and rakes, 10% waste and 3 bundles per square.

  1. Squares: 2,100 ÷ 100 = 21
  2. With 10% waste: 21 × 1.1 = 23.1 squares
  3. Bundles: 23.1 × 3 = 69.3 → 70 bundles
  4. Ridge cap: 40 ÷ 33 = 1.2 → 2 bundles
  5. Starter strip: 140 ÷ 105 = 1.3 → 2 bundles

Buy 70 bundles of shingles, 2 bundles of ridge cap and 2 bundles of starter strip.

How much extra to allow

Shingle waste is the cut-off at rakes, hips and valleys. More cut lines mean more waste.

SituationAllow
Shed roof5%
Simple gable10%
Hip roof15%
Valleys, dormers, turrets20%

Reading your result

The headline is the shingle bundle count. Ridge cap and starter strip are listed separately because they're separate products.

Keep a bundle or two of leftovers for repairs — the same color can be hard to match later.

Assumptions

  • The roof area is the true sloped area. Entering the footprint underestimates every count.
  • Coverage of 33 ft per ridge cap bundle and 105 ft per starter bundle; check your product.
  • Underlayment, drip edge, nails, flashing and vents are not included — the Roofing Calculator adds them.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Steep roofs (over about 8/12), two-storey eaves and soft or rotten decking call for a professional roofer with fall protection.

Frequently asked questions

How many bundles of shingles in a square?

Usually three for architectural and 3-tab shingles. Heavier designer shingles can be four or five — check the wrapper.

How many bundles do I need for 2,000 sq ft?

20 squares × 1.1 waste = 22 squares × 3 = 66 bundles.

Do I need starter shingles?

Yes. Starter strip along the eaves and rakes seals the first course and resists wind uplift; most shingle warranties require it.

Can I use regular shingles for ridge cap?

Cut 3-tab shingles were the old method. Architectural shingles need matching ridge cap shingles, which are thicker and pre-bent.

More roofing, siding & gutters calculators

All roofing, siding & gutters