Skip to content
MeasureToBuy

Material guide

Insulation

Insulation is bought by the bag and judged by R-value. Every bag has a coverage chart — and for blown-in, a minimum depth — that ties the two together.

Calculators

How insulation is sold

Batt bag
Pre-cut batts sized for 16 or 24 in framing. A Johns Manville R-13 bag of 15 × 93 in batts covers 106.56 sq ft.
Roll
Long batts you cut to length, handy for attics. An Owens Corning R-30, 15 in × 25 ft roll covers 31.25 sq ft.
Blown-in bag
Loose fiberglass or cellulose. The chart gives bags per 1,000 sq ft and minimum depth for each R-value — AttiCat needs 25 bags and 17 in for R-49 over 1,000 sq ft.

Terms on the label

R-value
Resistance to heat flow. Higher is better. US R-values are in ft²·°F·h/BTU; metric RSI = R × 0.1761.
Climate zone
IECC zones 1 (hot) to 8 (sub-arctic). ENERGY STAR's recommended levels depend on your zone.
Faced batt
Batt with a kraft paper vapor retarder on one side, installed toward the heated side in most climates.
Minimum thickness
The settled depth blown-in insulation must reach, together with the bag count, to deliver its rated R-value.

Buying tips

  • Seal air leaks before you insulate — insulation slows heat flow but doesn't stop air.
  • Keep insulation clear of recessed lights not rated IC and of flues, as the manufacturer directs.
  • Staple depth rulers to attic joists so you can see when blown-in reaches the minimum depth.