Skip to content
MeasureToBuy

Asphalt Calculator

Enter the driveway or path area and the compacted thickness. You'll get the tons of hot-mix asphalt to order and the crushed stone base underneath.

Measurements

Area shape

Measure length × width; add more for L-shapes

Driveways: 2 in (50 mm) minimum; 3–3½ in is common for durability. Always the rolled, compacted depth.

6–8 in (150–200 mm) of compacted crushed stone for a new driveway. 0 if you're paving over a sound existing base.

Waste allowance

Rule of thumb for edges, uneven grade and what stays in the truck.

Advanced optionscoverage, sizes, custom values
lb per sq yd per inch

Typical compacted mix weighs 108–120 lb per sq yd per inch (≈ 2,300–2,570 kg/m³). Your supplier's mix design has the exact figure.

Your estimate

You need about 9.24 tons of hot-mix asphalt.

480 sq ft × 3 in compacted, plus 5%.

Area
480 sq ft
Compacted thickness
3 in
Asphalt volume
4.44 cu yd
Waste allowance
5%
Asphalt to order
9.24 tons

Gravel base

Base depth
6 in
Base gravel (crusher run)10.22 cu yd incl. 15% compaction
15.84 tons
  • Hot mix is sold by the ton and laid loose, then rolled — rolling compacts it to about three-quarters of its loose depth.
  • Most plants have a minimum load; small patches are often cheaper with bagged cold patch.
Section · layers
ASPHALT3 inCOMPACTED BASE6 inGRADECOMPACTED SUBGRADE
Dig to the total depth, compact the soil, then build the base in layers. The highlighted surface is what you buy by the piece or ton.

Next step

Ordering the base stone?

Compare stone types and bulk delivery for the same area.

Gravel calculator

Also useful

Considering pavers instead?

Price the same driveway in pavers with a 6 in base.

Paver calculator

How to measure

  1. Measure the paved area. Split curves and flares into rectangles and circles and add them up.
  2. Choose the compacted (rolled) thickness: 2 in is the usual driveway minimum, 3–3½ in for a longer-lasting surface.
  3. Enter the compacted base depth — 6–8 in of crushed stone for a new driveway, or 0 if you're paving over a sound existing base.

How the asphalt calculation works

Asphalt (lb) = area (sq yd) × thickness (in) × mix weight (lb per sq yd per in) × (1 + waste)
Tons        = lb ÷ 2,000
Base gravel = area × base depth × 1.15

Asphalt plants sell by the ton, so volume is converted with the mix weight. The Pennsylvania Asphalt Pavement Association's checklist puts typical compacted mix at 108–120 lb per square yard per inch of thickness (144–160 lb per cu ft) and uses 110 in its worked example.

Your supplier's job mix formula gives the exact figure; enter it under Advanced options.

Worked example

A 40 × 12 ft driveway, 3 in compacted, on a 6 in base, with 5% extra.

  1. Area: 40 × 12 = 480 sq ft = 53.3 sq yd
  2. Asphalt: 53.3 × 3 × 110 = 17,600 lb × 1.05 = 18,480 lb = 9.24 tons
  3. Base: 480 × 6 ÷ 12 = 240 cu ft × 1.15 = 276 cu ft (10.2 cu yd) × 1.55 = 15.8 tons

Order about 9.24 tons of asphalt and 15.8 tons of base stone.

Reading your result

Asphalt tons are what you quote with the plant or paver. Most plants have a minimum load, which can make small jobs relatively expensive.

Asphalt is laid hot and must be compacted within minutes, so large areas need a paving crew and roller.

Assumptions

  • Mix weight 110 lb per sq yd per inch (≈ 2,350 kg/m³), the middle of the typical 108–120 range.
  • Thickness is compacted; loose mix is spread thicker and rolled down.
  • Driveway thickness guidance from the Ontario Hot Mix Producers Association driveway guide: 2 in minimum, 2 in base + 1½ in surface course for durability, over 6–8 in of compacted granular base.
  • Crusher run base at about 1.55 tons per cubic yard; the waste allowance is a rule of thumb.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Driveways for RVs, delivery trucks or on soft, wet soil need a thicker section and possibly excavation and geotextile; a paving contractor can assess the subgrade. Many towns require a permit for a new curb cut or apron.

Frequently asked questions

How many tons of asphalt do I need for a driveway?

Multiply square yards × compacted inches × about 110 lb, then divide by 2,000. A 480 sq ft driveway at 3 in needs about 8.8 tons before waste.

How thick should an asphalt driveway be?

At least 2 in compacted; 3–3½ in (often a 2 in base course plus a 1½ in surface course) lasts longer, over 6–8 in of compacted crushed stone.

How much does a cubic yard of asphalt weigh?

At 144–160 lb per cu ft, a cubic yard of compacted asphalt weighs about 1.9–2.2 tons.

More concrete & masonry calculators

All concrete & masonry