Skip to content
MeasureToBuy

Brick Calculator

Enter the wall size, brick size and mortar joint. The calculator subtracts openings, counts bricks for one or two wythes with waste, and estimates mortar both as premixed bags and as masonry cement plus sand.

Measurements

Measure the wall by

Doors and windows: width × height of each, added up. 0 for none.

Brick size

7⅝ × 2¼ in face — the US standard

⅜ in (10 mm) is standard.

Wall thickness

One brick thick — veneer, garden walls

Waste allowance

5% for straight runs, 10% with many cuts, corners or openings.

Your estimate

You need about 576 bricks (5% waste included).

80 sq ft of wall × 6.86 bricks per sq ft, plus 5% waste.

Wall area
80 sq ft
Net wall area
80 sq ft
Bricks per sq ftwith mortar joints
6.86
Bricks laid
549 bricks
Bricks to buy
576 bricks

Mortar: premixed (approximate)

80 lb bags of mortar mix≈ 35 bricks per bag
16 bags

Or mix your own (approximate)

70 lb bags of masonry cement≈ 7 × 70 lb per 1,000 bricks
4 bags
Mason's sand≈ 3 cu ft per bag
12 cu ft
  • Mortar quantities are industry rules of thumb. Joint fill, brick cores and frogs, and how much drops on the ground all vary — buy a bag or two extra and return what you don't open.
Brick wall · elevation
20 ft4 ftRUNNING BOND · SINGLE WYTHE
Bricks = (wall area − openings) ÷ area of one brick plus its joint. Courses are drawn for illustration, not to scale.

Next step

Mixing your own mortar?

Mason's sand is sold by the ton or bag — check how much a delivery minimum covers.

Sand Calculator

Also useful

Build on a footing

Freestanding brick walls need a concrete footing below the frost line.

Concrete Footing Calculator

How to measure

  1. Measure the wall's length and finished height. For several walls, add up their areas and use 'Known area'.
  2. Measure each door and window opening (width × height) and add them together.
  3. Check the brick size on the pallet or spec sheet. US modular brick is 7⅝ × 2¼ in on the face; queen and king sizes are larger.
  4. Use the joint thickness you'll actually lay — ⅜ in (10 mm) is standard.
  5. Single wythe is one brick thick (veneer, garden walls); double wythe is two bricks thick.

How the brick calculation works

Bricks per sq ft = 144 ÷ ((brick length + joint) × (brick height + joint))
Net wall area    = wall area − openings
Bricks laid      = net area × bricks per sq ft × wythes
Bricks to buy    = bricks laid × (1 + waste), rounded up

Premixed mortar  ≈ bricks laid ÷ 35  (80 lb bags)
Masonry cement   ≈ bricks laid ÷ 1,000 × 7  (70 lb bags)
Mason's sand     ≈ 3 cu ft per bag of masonry cement

Each brick plus half the joint around it occupies a small rectangle of wall. Divide one square foot (144 sq in) by that rectangle and you have bricks per square foot: 6.86 for modular brick with ⅜ in joints.

Mortar is estimated with two industry rules of thumb applied to the bricks actually laid: about 7 bags of 70 lb masonry cement per 1,000 modular bricks (with roughly 3 cu ft of sand per bag), or about 35–40 bricks per 80 lb bag of premixed mortar. The calculator uses 35 so you don't run short.

Worked example

A 20 ft × 4 ft garden wall, single wythe of modular brick, ⅜ in joints, 5% waste.

  1. Wall area: 20 × 4 = 80 sq ft
  2. Bricks per sq ft: 144 ÷ (8 × 2.625) = 6.86
  3. Bricks laid: 80 × 6.86 = 549
  4. With 5% waste: 548.6 × 1.05 = 576 bricks
  5. Premixed mortar: 548.6 ÷ 35 = 15.7 → 16 × 80 lb bags
  6. Or masonry cement: 548.6 ÷ 1,000 × 7 = 3.8 → 4 × 70 lb bags, plus 12 cu ft of sand

Buy 576 bricks and 16 bags of premixed mortar — or 4 bags of masonry cement and about 12 cu ft of mason's sand if you mix your own.

How much extra to allow

Bricks chip in delivery and get cut at corners, openings and the top course.

SituationAllow
Long straight wall, few cuts5%
Corners, piers and several openings10%
Patterns, arches or reclaimed brick15%

Reading your result

The highlighted brick count is what to order. Brick is often sold by the pallet (around 500 modular bricks) — round to full pallets if the supplier requires it.

Use one mortar option, not both. Premixed bags are simpler for small walls; masonry cement and sand are cheaper for bigger jobs.

Buy all brick from one production run so the color matches.

Assumptions

  • Bricks are laid in running bond with full head and bed joints. Patterns with headers or soldiers change the count.
  • Mortar rules of thumb are for modular brick. Larger bricks use slightly more mortar per brick; cored or frogged bricks also take more.
  • Double-wythe walls need ties or header courses and a collar joint, which aren't included.

Unit conversions use exact definitions (1 in = 25.4 mm, 1 US gal = 3.785 L). See the calculation methodology for rounding rules.

When to call a professional

  • Retaining walls, load-bearing walls, chimneys and anything over about 4 ft high need proper footings, reinforcement and often a permit — talk to a mason or engineer.

Frequently asked questions

How many bricks are in a square foot?

About 6.86 modular bricks per square foot with ⅜ in joints. Queen brick is about 5.76 and king brick about 4.8.

How many bricks per square meter?

About 59 metric bricks (215 × 65 mm with 10 mm joints) per square meter, single skin.

How many bags of mortar for 1,000 bricks?

Roughly 7 bags of 70 lb masonry cement plus about 21 cu ft of sand, or 25–29 bags of 80 lb premixed mortar mix. These are rules of thumb — joint size and brick type move them.

How much waste should I add for bricks?

5% for simple straight walls, 10% with corners and openings, 15% for patterns or reclaimed brick.

More concrete & masonry calculators

All concrete & masonry